Ok so here is what I did. EVO All with T-harness on 2012 F-150 FX4. I connected CAN HI and CAN LOW as well connected Yellow, Lt Blue and Lt. blue w/black from T-harness to EVO per guide. I do not have anything else wired. I flashed firmware 71.18 and set all options to OFF except C1, D1 with 15 min runtime. During initial programming after receiving solid blue and inserting key to ON position... blue light begin to flash rapidly but than stops and I get solid yellow. I attempted with both of my OEM keys and received same results.
What am I missing? Please advise .... Thank you,
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
